We are no longer selling the actual fence kits for our fence systems. Instead, you can now purchase the plans as well as purchasing sources for a small cost. We believe this will give the user more freedom to customize and also reduce overall end-user cost.
Designed from the ground up to be installed on virtually any table saw – including but not limited to – Craftsman Contractor Series Saws (Model 113 and others), Delta table saws, Grizzly table saws, Dewalt and many others!
This listing will provide you with the PDF plans to build this table saw fence system which uses V slot rail with stainless steel rollers. Plans include a step by step installation manual, parts list and links to purchase items.
A table saw fence system with a bolt-on design that provides high accuracy, repeatability and a easy installation.
What am I paying for?
In the cost of this item, you will get the following:
Step by step instructions with pictures on how to install this fence system
List of vendors and sources on where you can purchase all the parts needed for this fence system
A detailed parts list which includes each and every part (including nuts & bolts) you will need
NOTE: After purchasing this item, you will be able to access the Parts List & Installation Manual in the “Downloads” section under “My Account”.
Self Aligning: The fence ALWAYS remains parallel to your table saw’s miter slot, even during movement. This, by far is the biggest advantage of our design. Many fence systems rely on them being clamped down in order to align with the miter slot. However, the unique sliders in our design keep the fence perfectly square at all times.
Built Using Sturdy Aluminum Extrusions: The fence extrusion is a 2″ x 2″ and is made from AA 6063-T6 aluminum alloy. It uses 80/20’s double anchor fasteners between the fence connection and the slider assembly which provide the strongest mechanical connection possible. The rail is a 2020 OpenBuilds V slot extrusion.
Smooth Movement: Our design uses highly precise, open source OpenBuilds V slot extrusions which have built in linear rails. Stainless steel wheel bearings provide smooth and consistent motion across these rails and also have adjustable tension using eccentric spacers. The bearings have dust caps which increases longevity.
Easy Installation: This system was designed with ease of installation in mind. No drilling mounting holes here! The front slider is designed such that existing mounting holes can be used while the height of the fence can easily be adjusted using the anchor fasteners.
Flexible Design: Due to the unique design, the front rail can be slid left or right. This allows for increase or decrease of the cutting capacity using the fence. This is beneficial in smaller workspaces where the physical footprint of the fence system can be reduced when needed.
Adjustability: The design of this system allows for easily adjustability all around! The rail screws on the front rail mounts allow adjustability of the fence to be parallel with the miter slot. The eccentric spacers on the sliders allow adjustment of the tension between the wheels and the rails. The rail supports and the vertical fence support can be cut/shortened to size as well.
Tape Measure Included: The fence system includes a tape measure rail (left to right with standard markings), a cursor/marker, and an adhesive backed tape measure.
Optional Accessories: The fence extrusion has 2 T-slots on all 4 sides which allows for endless opportunities for creating different jigs and accessories – anywhere from a simple stop block to a tennon jig.
Package Includes: This listing includes the front rail, fence extrusion, front sliding assembly and all hardware needed.
NOTE: After purchasing this item, you will be able to access the Parts List & Installation Manual in the “Downloads” section.
Front Slider
Front Slider
Rail Supports
Liner Rail
Product Videos
10 reviews for Plans for Alumi-Lign™ Table Saw Fence System – Using V Slot Gantry
I made a few mistakes on my end and had to modify and add a few parts so that everything would fit my old delta 10” contractor saw but I got it together and am pleased with the accuracy of the fence. I even added a fence guide at the rear of the saw for a bit more support.
(0)(0)
Rated 5 out of 5
Mark O’Connell
I made a few mistakes on my end and had to modify and add a few parts so that everything would fit my old delta 10” contractor saw but I got it together and am pleased with the accuracy of the fence. I even added a fence guide at the rear of the saw for a bit more support.
(0)(0)
Rated 5 out of 5
Mark O’Connell
I made a few mistakes on my end and had to modify and add a few parts so that everything would fit my old delta 10” contractor saw but I got it together and am pleased with the accuracy of the fence. I even added a fence guide at the rear of the saw for a bit more support.
(0)(0)
Rated 5 out of 5
Zack DS
HUGE upgrade!! I'll probably cut down the fence itself, I'm just not sure how short I want to make it. So happy to finally have a quality fence! Thanks JBuilds!
(0)(0)
Rated 5 out of 5
D Royster
Works great!
(1)(0)
Rated 5 out of 5
D Royster
Works great!
(1)(0)
Rated 5 out of 5
Steve Grabe
Such an amazing improvement over my Craftsman 113's original fence that I'm really impressed. It travels so smoothly and cuts square. Added rear magnetic switch clamps for when cutting large boards.
(2)(0)
1-5 of 10 reviews
Mark O’Connell
Featured Review
Rated 5 out of 5
I made a few mistakes on my end and had to modify and add a few parts so that everything would fit my old delta 10” contractor saw but I got it together and am pleased with the accuracy of the fence. I even added a fence guide at the rear of the saw for a bit more support.
(0)(0)
Zack DS
Featured Review
Rated 5 out of 5
HUGE upgrade!! I’ll probably cut down the fence itself, I’m just not sure how short I want to make it. So happy to finally have a quality fence! Thanks JBuilds!
(0)(0)
Greg Boyer
Rated 4 out of 5
Documentation could be improved. Aside from that it’s a very nice addition to the saw. Light years better than the original.
(0)(0)
ryan olesky
Rated 5 out of 5
Game changer. 10/10.
(0)(0)
Joseph
Rated 5 out of 5
Just what I have been looking for at the right price I was looking for accuracy, hats off to JBuild. I had trials and errors but figured most out with JBuild help. I would buy it again.
I made a few mistakes on my end and had to modify and add a few parts so that everything would fit my old delta 10” contractor saw but I got it together and am pleased with the accuracy of the fence. I even added a fence guide at the rear of the saw for a bit more support.
HUGE upgrade!! I’ll probably cut down the fence itself, I’m just not sure how short I want to make it. So happy to finally have a quality fence! Thanks JBuilds!
Documentation could be improved. Aside from that it’s a very nice addition to the saw. Light years better than the original.
Game changer. 10/10.
Just what I have been looking for at the right price I was looking for accuracy, hats off to JBuild. I had trials and errors but figured most out with JBuild help. I would buy it again.